The Taurus II.2 Ring Saw is the standard for a dependable, easy-to-use saw. It is a professional size ring saw at an affordable price.

The Taurus II.2 Ring Saw utilizes a round diamond-coated blade that:

• Cuts in All Directions - The diamonds on the blade cut your material wherever it touches the blade, even side to side or backwards.
• Grinds as it Cuts - Leaves a smooth edge that requires little or no finish grinding.
• Cuts "Under Water" While You Stay Dry - Designed so that water is deposited around the entire blade, keeping it cooler and longer lasting. The blade will not load up with glass because the debris is carried away suspended in water.
• Comes with a one-piece, long-lasting stainless steel blade with no welds or seams. This reduces broken blades. A separating ring blade is also available.

For Taurus II.2 Ring Saws in our online catalog
Click Here

Taurus II.2 Ring Saw Specifications:

• Drive Motor: 1/5 horsepower, 110 volt, 50-60 Hz
• Blade: 5 3/4 inch, diamond-coated, stainless steel, 80 grit
• Controls: on/off switch
• Weight: 11 pounds (Saw Only)
• Warranty: 2 years excluding blade